Karinya

Hexbeam Photo Gallery

This gallery shows photographs of the various HexBeam antennas I have constructed over the past couple of years. It is not meant to be a step-by-step guide to construction, but rather a potpourri of techniques which may give you some ideas for constructing your own HexBeam.

  • Driver / Reflector fixings

  • Wire supports

  • Mk 2 end spacing fixing

  • Current Probe

  • Spreader fixing

  • Mk 2 spreader fixing

  • Mk 2 final assembly

I used the same connector block arrangement to fix the wire elements to their end-spacing cords. But this time I used a brass screw to avoid corrosion problems.